T
Latest activity Postings Media About
-
-
TTinFoilHat replied to the thread Wide mouth skimmer basket.You will need to give the manufacturer and model of your pool and preferably a PN from the old skimmer to get help. At least some...
-
TTinFoilHat replied to the thread New pool owner trying to understand test strip reading.All you do is squirt a bit into the tube and glance. Then squirt more and glance again. It is low. Get yourself a couple of lbs of...
-
TTinFoilHat replied to the thread How high do you let CH go?.You will need to drain your pool and refill it to make it manageable again. You can't get a good CSI at that CH level. Mine was 900...
-
TTinFoilHat replied to the thread Pool Looking Green - Opening Tomorrow.Yes, it's entirely possible that you need to backwash already. That algae is collecting in the DE. You need to backwash when your...
-
TTinFoilHat replied to the thread Pool looks green even after 5 days at slam level.Reorder the powder from TFTestkits.com. They can probably overnight it to you.
-
TTinFoilHat replied to the thread Calculating Volume of Irregular Pool.If there is any chance that you will be draining and refilling your pool then you can measure how many gallons run through your water...
-
TTinFoilHat replied to the thread New Pool Filter for a 38,000 Gallons pool.Why a pool service? You don't have any time to handle the water balance yourself?
-
TTinFoilHat replied to the thread Recommendations for SWG.With any automation system you will not need the timer. Without automation, if you run a pump, VS or not, by itself and add a SWG then...
-
TTinFoilHat replied to the thread 18 x 33 x 56" Semi-In Ground NJ.Is your soil all silt or are you backfilling with sand? I see a big pile of it.
-
TTinFoilHat replied to the thread Testing beside the pool.Just dump your reagents into a stream of water running in the sink.
-
TTinFoilHat replied to the thread Pool opened to brown water - dust from TX/NM.Normal pump speed with normal water return to the pool should be fine. That is up to you.
-
TTinFoilHat replied to the thread Stabilizer granules.Wrong, wrong, wrong way to do it. Just put your granules into an old sock and hang it in front of a pool return so it can dissolve...
-
TTinFoilHat replied to the thread Recommendations for SWG.That sounds like a sub market SWG. You mention automation in the future. If you are definitely going that direction then try to keep...
-
TTinFoilHat replied to the thread Pool opened to brown water - dust from TX/NM.Your robot will be overwhelmed. Just let the filter do it's job and backwash it when it rises 25% over it's clean pressure. You are...
-
TTinFoilHat replied to the thread Testing beside the pool.I, as many do, test my water in my kitchen. I also have to go to the sink to rinse my cylinders so there is no difference there. Just...
-
-
Loading…
-
Loading…
-
Loading…