Report

Dirk

Gold Supporter TFP Guide

Well-known member From Central California

Joined: Nov 12, 2017

Start conversation

Latest activity Postings Media About

- Dirk replied to the thread 10 Day Old IC-40 Just Went Dark.
  
  Here's some more data for you: and... The IpH specs are telling us that the IC can pull up to 7.3A (probably less for an IC40, but...
  
  Today at 4:34 PM
- Dirk added the media item Screen Shot 2024-04-26 at 1.19.35 PM.png to Pool Equipment.
  
  Today at 4:34 PM
- Dirk added the media item intellipH voltages.jpg to Pool Equipment.
  
  Today at 4:34 PM
- Dirk reacted to Lake Placid's post in the thread Another IPH burned connection issue with Like.
  
  Yep I soldered all connections. The existing pigtails and my pigtails were long enough that there was plenty of room to work outside...
  
  Today at 4:16 PM
- Dirk replied to the thread 10 Day Old IC-40 Just Went Dark.
  
  Sorry, I may have misunderstood. If you're going to use a jumper between the reds and blacks, like LP did, then the gauge of that wire...
  
  Today at 4:11 PM
- Dirk replied to the thread Another IPH burned connection issue.
  
  Yes, both. Most would just wire nut wires together. And that will be fine. But, for example, I took the trouble to solder all my garden...
  
  Today at 12:16 PM
- Dirk replied to the thread 10 Day Old IC-40 Just Went Dark.
  
  Shoot, I don't have any wire in front of me just now to guesstimate. But 16 would be more than enough, if you can reasonably get it...
  
  Today at 12:01 PM
- Dirk replied to the thread 10 Day Old IC-40 Just Went Dark.
  
  My original "vision" was to not cut the reds and blacks. Just strip them, bind them together with one end of the jumper, solder all that...
  
  Today at 11:57 AM
- Dirk replied to the thread 10 Day Old IC-40 Just Went Dark.
  
  See recent post.
  
  Today at 11:48 AM
- Dirk replied to the thread Another IPH burned connection issue.
  
  I personally like soldering. My theory is the IpH meltdown occurs because the pins corrode, resistance rises, then heat is generated...
  
  Today at 11:47 AM
- Dirk replied to the thread 10 Day Old IC-40 Just Went Dark.
  
  Can one of you point me to @Lake Placid's fix? I saw it before, I want to revisit it. If it's the one I remember, is was very fine work...
  
  Today at 11:25 AM
- Dirk replied to the thread 10 Day Old IC-40 Just Went Dark.
  
  Rosin core. Low wattage iron. What's critical is that you work quickly, with as low a wattage as will melt solder. What you don't want...
  
  Today at 11:15 AM
- Dirk reacted to Lake Placid's post in the thread 10 Day Old IC-40 Just Went Dark with Like.
  
  I use an old RadioShack adjustable wattage soldering iron. It will output from 0 to 50 watts. I can fine tune the heat I need for the...
  
  Today at 11:08 AM
- Dirk reacted to Lake Placid's post in the thread 10 Day Old IC-40 Just Went Dark with Like.
  
  The testing you did would not have included the IPH connectors AND the resistance they would induce into the circuit - which would have...
  
  Today at 11:08 AM
- Dirk reacted to HermanTX's post in the thread Guidance needed, 3 years using TFP and I am at a loss (Solved) with Like.
  
  One idea is to set the SWCG at your desired replacement FC ppm, then add liquid chlorine to reach the level of FC you want to hold. So...
  
  Today at 11:02 AM
Show older items
Loading…
Loading…
Loading…

Top Bottom

Back

Search

Dirk

Find content

Latest activity Postings Media About