Thank you all upfront for your help. I've done my homework by reading past posts and am somewhat familiar with How to SLAM at this point. Pool was cloudy yesterday and then started turning a nice shade of green. I tested and these were the results as of last night:
FC: 1
TA: 180
PH: 7.6
CYA: 40
Pool is 17000 gallons so based on CYA I'm targeting a SLAM level of FC: 16. Pool Math gave me a value of 336 oz of 8.2% bleach which I added last night.
1st full day of SLAM (8am readings) - added another 300oz of bleach to get back up to 16
FC: 2
TA: 180
PH: 7.6
CYA: 40
Noon reading - added 146oz of bleach to get back to 16
FC: 10
TA: 180
PH: 7.6
CYA: 40
Filter is also running 24/7 and I plan to fully clean the cartridge once a day during this process. I will also scrub the entire pool once a day as well.
Is there anything else I should be doing at this point?
FC: 1
TA: 180
PH: 7.6
CYA: 40
Pool is 17000 gallons so based on CYA I'm targeting a SLAM level of FC: 16. Pool Math gave me a value of 336 oz of 8.2% bleach which I added last night.
1st full day of SLAM (8am readings) - added another 300oz of bleach to get back up to 16
FC: 2
TA: 180
PH: 7.6
CYA: 40
Noon reading - added 146oz of bleach to get back to 16
FC: 10
TA: 180
PH: 7.6
CYA: 40
Filter is also running 24/7 and I plan to fully clean the cartridge once a day during this process. I will also scrub the entire pool once a day as well.
Is there anything else I should be doing at this point?