Best Chlorine Tabs to use in floater for Infinity Edge

Salty1

Active member
Jul 12, 2020
34
San Diego
Pool Size
24000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-40
What are the best tablets to use in Infinity Edge?
Yes it has always be advised by pool builder and pool maintenance since the edge does
not run as much as the pool.
Have been using Tricolor but thinking about switching to Cal Hypo due to High CYA...not currently happening
since water has been replaced.
Or best to stay with what we know?
 
Is this for the period of time your cell is not working? If so, liquid chlorine is the best option.

You can use either, but what are your CH and CYA levels.
 
I think they mean the catch basin of the infinity edge. 👇
Is this for the period of time your cell is not working? If so, liquid chlorine is the best option.

You can use either, but what are your CH and CYA levels.
CH=400
CYA=80
Yes the basin-cell runs 8 hours a day, the basin runs about 1 hour unless more than 3 people in the pool. And that happens about 4 times in a month. It has about 2 ft of water about 8 ft long.
We have always used the tabs for slow release
 
Last edited:
  • Like
Reactions: Newdude
What is your CSI? If you are using pool math, go to gear in upper right, enable temperature and CSI. Enter a value for your pool water temperature and post your CSI.
 
Post a full set of results. Your CSI is already high. Adding more cal-hypo will raise CSI. With a positive CSI you are risking scaling in the pool and in the SWCG.
 
Post a full set of results. Your CSI is already high. Adding more cal-hypo will raise CSI. With a positive CSI you are risking scaling in the pool and in the SWCG.
Whelp I don't want that so will stay with the tablets I know.
Have not tested the pool today have to run off..get numbers later...thank you
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.