Is this normal?

crosby1612

Well-known member
Apr 25, 2024
98
richmond VA
Pool Size
11000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Jandy Aquapure 1400
At half speed (1750 rpm) this is what the sight glass looks like. At full speed, the filter chamber is completely filled with water. Is this normal for the water level to drop like this? I can't upload a video, there's air under the sight glass at half speed. Thank you!
 

Attachments

  • image.jpg
    image.jpg
    406.8 KB · Views: 8
  • image.jpg
    image.jpg
    387.1 KB · Views: 8
A little pocket of air is very normal at low RPM. I can't tell from your picture how much air is in the view. It should not be any larger than the size of a quarter or half dollar - ish.
 
A little pocket of air is very normal at low RPM. I can't tell from your picture how much air is in the view. It should not be any larger than the size of a quarter or half dollar - ish.
The water level seems to drop a good inch or so at half speed. This is a brand new pump as of April
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.