I have been dealing with yellow algae in my pool and a couple of days ago began to SLAM the pool. I had ph down to 7.2, CYA at 30 and FC at 12. Last night we received 3" of rain to the point that the water level is at the top of my above ground skimmer. It is still raining so I have not been able to take current readings. What affect will I see to my SLAM efforts.
What to expect
- Thread starter szap
- Start date
- Feb 6, 2015
- 7,813
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Why can't you test if it's raining?
If the pump has been on for at least 30 minutes, go grab a water sample from at least 12-18 inches below the water surface.
Since you're in the SLAM Process, only test FC and dose chlorine accordingly.
If the pump has been on for at least 30 minutes, go grab a water sample from at least 12-18 inches below the water surface.
Since you're in the SLAM Process, only test FC and dose chlorine accordingly.
- Jun 1, 2018
- 16,019
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)