Hello, over the past two days I replumbed my filter set-up. I'm making the switch to SWG this year! A friend gave me his old Sta-Rite Cristal Flo II (Model 145361). I just finished up all my plumbing last night and I went to start up and I've got an electrical issue that I think I have the solution for. However, what I don't have a solution for is that with the pump off and valves open from the pool skimmer and pool return it appears like I've got a leak in the multi-valve. I get a slow trickle of waste coming from the waste port. Hopefully this is something simple. I still have my previous filter, but it was quite a bit smaller and I would have to replumb everything again. Any suggestions?
Leaking out Waste Port
- Thread starter NDFootballFan
- Start date
I can add photos when I get home this evening. I will double check but I'm fairly certain the plumbing is accurate.
If the plumbing is correct, you might need to clean and lubricate the internal rubber gaskets and O-rings or replace them.
Pentair Sta-Rite Sand Filter Top Mount Multiport Valve with Clamp, 1-1/2", 272526 - 262506 - INYOPools.com
Pentair pool filter valve for the following sand filter models. Sand Dollar, Tagelus, Meteor, Crystal-Flo II, and a few others.
www.inyopools.com
Pentair Sta-Rite Sand Filter Top Mount Multiport Valve with Clamp, 1-1/2", 272526 - 262506
Pentair - Pac Fab Top Mount 1 1/2" 26-1124, 26-1130, 26-2506 Parts - INYOPools.com
Pentair - Pac Fab Top Mount 1 1/2" 26-1124, 26-1130, 26-2506 - INYOpools.com has the largest selection of swimming pool and spa replacement parts with over 70,000 parts in stock. Order today and save!
www.inyopools.com
272512 Diverter w/Grasket
TA Tagelus Filter Valves
The top mounted HiFlow and Multiport valves are designed for maximum sand filter backwash performance and precise water flow. Available in 1-1/2 and 2 in. threaded.
Diverter with Spider Gasket Compatible with 1.5" Pentair 272512 Hi-Flow Multiport Valve | By Pureline | PL0742 - INYOPools.com
Replacement Valve Diverter w/ Spider Gasket for Pentair 272512
www.inyopools.com
Pentair Sta-Rite Sand Filter Top Mount Multiport Valve with Clamp, 1-1/2", 272526 - 262506 - INYOPools.com
Pentair pool filter valve for the following sand filter models. Sand Dollar, Tagelus, Meteor, Crystal-Flo II, and a few others.
Pentair Sta-Rite Sand Filter Top Mount Multiport Valve with Clamp, 1-1/2", 272526 - 262506
View attachment 564866
View attachment 564867
Pentair - Pac Fab Top Mount 1 1/2" 26-1124, 26-1130, 26-2506 Parts - INYOPools.com
Pentair - Pac Fab Top Mount 1 1/2" 26-1124, 26-1130, 26-2506 - INYOpools.com has the largest selection of swimming pool and spa replacement parts with over 70,000 parts in stock. Order today and save!
View attachment 564869
View attachment 564870
272512 Diverter w/Grasket
TA Tagelus Filter Valves
The top mounted HiFlow and Multiport valves are designed for maximum sand filter backwash performance and precise water flow. Available in 1-1/2 and 2 in. threaded.www.pentair.com
Pureline Replacement Valve Compatible with 1-1/2" Pentair Sand Filters, Clamp Style - PL0700 - INYOPools.com
Replacement Valve for 1-1/2" Pentair™ Sand Filters Clamp Style
www.inyopools.com
This says it is a replacement and is about $50 cheaper. My only concern is will it match up with my current plumbing? I'd really like to avoid doing that all over again.
Do you want to replace the valve or just the diverter?
Did you use the unions that are made for the valve?
You can ask Inyo if the plumbing lines up.
Did you use the unions that are made for the valve?
You can ask Inyo if the plumbing lines up.
The valve is ~15 years old. I was just going to replace the whole assembly. I’ll give a photo in a few hours of my set-up.
The union kit is a good choice for that valve.
www.inyopools.com
Pentair Union Kit 1-1/2" Valve - 150119 - INYOPools.com
Pentair Union Kit 1-1/2" Valve
www.inyopools.com
On second thought replacing those parts seems straightforward. Thank you for the video guides. I’ll try replacing parts first.