I had code 000F showing all day yesterday, and spent quite a while trying to figure it out.
000F is a low voltage indicator for this pump. I seen a couple of other posts asking about this code but in my opinion did not see anything that was a real resolution.
First problem, I disassembled the plug itself, and found that ants made a nest inside the plug. I shook that out and cleaned it out and reassembled the plug.
Second problem, after turning off the breaker of course, I took apart the outlet box. Once I took the front cover off, a ton of brown water can pouring out of the box itself. I'm fairly certain that was the issue lol.
I left it open and allowed the outlet box to dry out.
After about an hour, I plugged my pump back in and it worked. This might not be the problem for all but hopefully this tip helps.
000F is a low voltage indicator for this pump. I seen a couple of other posts asking about this code but in my opinion did not see anything that was a real resolution.
First problem, I disassembled the plug itself, and found that ants made a nest inside the plug. I shook that out and cleaned it out and reassembled the plug.
Second problem, after turning off the breaker of course, I took apart the outlet box. Once I took the front cover off, a ton of brown water can pouring out of the box itself. I'm fairly certain that was the issue lol.
I left it open and allowed the outlet box to dry out.
After about an hour, I plugged my pump back in and it worked. This might not be the problem for all but hopefully this tip helps.
