It's happened 2-3 times already over the course of 6+ months maybe (with FC/CC, not with any of the other chemistry readings) and it's usually a weirdly low reading compared to what I should have so I do another test immediately to double check and find the 2nd test to show a higher, more accurate reading of where I'm supposed to be.
Yesterday:
FC 11.5 and < 0.5cc
pH 7.8 (added 1/4 gal of MA to drop it just a little)
TA 50
CYA 55 (I'll be adding stabilizer once it delivers in a couple of days)
Those readings were just before we had a few friends over yesterday (total bather load of 8 people) and the SWG ran the whole time plus our usual run time overnight so testing the water today I would assume to be a similar level or couple points lower.
Just now when I tested FC it showed 6 with a CC of 2. I knew immediately that couldn't be correct unless my new SWG was on the fritz so I
re-tested and got FC 9.5 w CC of < 0.5 which is what I would have expected.
How often do false readings come through on FC testing?
Yesterday:
FC 11.5 and < 0.5cc
pH 7.8 (added 1/4 gal of MA to drop it just a little)
TA 50
CYA 55 (I'll be adding stabilizer once it delivers in a couple of days)
Those readings were just before we had a few friends over yesterday (total bather load of 8 people) and the SWG ran the whole time plus our usual run time overnight so testing the water today I would assume to be a similar level or couple points lower.
Just now when I tested FC it showed 6 with a CC of 2. I knew immediately that couldn't be correct unless my new SWG was on the fritz so I
re-tested and got FC 9.5 w CC of < 0.5 which is what I would have expected.
How often do false readings come through on FC testing?