- Apr 8, 2020
- 25
- Pool Size
- 52000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite Pro (T-15)
I have successfully pulled and replaced 1 x ColorLogic light, but the second fixture cable is stuck in conduit.
I attached a proper nylon pulling line to the ColorLogic light cable (3 conductor) near the junction box, then started pulling the cable from the pool side. Started off great, but after pulling only about 10 feet, the cable broke. I was not even pulling that hard when it broke.
I tried to pull the cable back through the topside (junction box) and it broke at the tie point between the pulling cable and light cable. Now, I have approximately 90 feet of thick ColorLogic light cable stuck in the conduit and nothing connected to the cable.
It seems sort of hopeless to me, but I thought I would post something here in case someone has encountered this issue and found a solution.
I attached a proper nylon pulling line to the ColorLogic light cable (3 conductor) near the junction box, then started pulling the cable from the pool side. Started off great, but after pulling only about 10 feet, the cable broke. I was not even pulling that hard when it broke.
I tried to pull the cable back through the topside (junction box) and it broke at the tie point between the pulling cable and light cable. Now, I have approximately 90 feet of thick ColorLogic light cable stuck in the conduit and nothing connected to the cable.
It seems sort of hopeless to me, but I thought I would post something here in case someone has encountered this issue and found a solution.