- Apr 12, 2016
- 662
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Ok, I have this CL / MA system working good in my tub, add chlorine every day and a very little MA maybe a couple times a week maintain FC at 3-5, PH right around 7.6, TA is steady at 40, CYA at 35. My hardness level s low but doesn't seem to have a negative effect. Thanks for the lesson TFP!
But I get a little "bathtub ring" not scummy (is that a word?) more like just a haze around the water line. Is this just normal? or something else need to be done? It cleans off pretty easy but....
Could be I've always had this on all my tubs but this one is the first with a dark (blue) shell so it shows up. Just wipe it down every couple days or something else?
But I get a little "bathtub ring" not scummy (is that a word?) more like just a haze around the water line. Is this just normal? or something else need to be done? It cleans off pretty easy but....
Could be I've always had this on all my tubs but this one is the first with a dark (blue) shell so it shows up. Just wipe it down every couple days or something else?