Ok I need some help, odd water loss??

Jun 26, 2015
70
Layton. Utah
Pool Size
1224
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Intex Krystal Clear
So I went out and checked the pool today (only been up 2 days, and have another issue, anyway) and the pool level dropped A TON see pic... only thing I can figure it came from the pump (wasn't ran) look at the pics and tell me what you think?? You can see where it came from (dirt trail) and the water on the bottom of the pump.. Wasn't leaking during the day, this happened last night.
 

Attachments

  • 20200624_092859.jpg
    20200624_092859.jpg
    376 KB · Views: 32
  • 20200624_092940.jpg
    20200624_092940.jpg
    442.9 KB · Views: 33
  • resize.jpg
    resize.jpg
    1 MB · Views: 34
Was it wet where the hose connects at the top of the pump leading to the filter?
Not really, there is a slight drip from the area leading to the filter... but nothing that would allow this type of "dump" of water... Shy of filling it back up, i am at a loss... Like I said, last night before bed, fine.. then boom. I want to fix it before I fill up..

Only other thing I can think of.. i need to tighten that nut inside the pre-filter area. (the one that attaches the pre-filter to the pump)
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.