- Jul 26, 2022
- 11
- Pool Size
- 25000
- Surface
- Plaster
- Chlorine
- Liquid Chlorine
- SWG Type
- Solaxx (Saltron) Reliant / Purechlor R5
Hi all. We bought our place with our pool last summer and replaced a lot. This is our first spring open. We had the pool builder come out to open it, which they did. However they said our pressure gage was broken as it was reading zero pressure. I just replaced it with a new Jandy gage and it still reads zero.
It probably says this in my profile but we have a jandy cartridge system. Cartridges are new as of last year. The clear top on the pump doesn’t show air bubbles and water is flowing. The baskets are clean. As far I can tell there are no leaks.
The only other new thing is I recently replaced the salt cell. It doesn’t appear to be leaking and shows it has water but the controller says there’s low water flow. I thought it may be a bad flow switch but could it be related to my pressure issue?
Thank you in advance for any advice.
It probably says this in my profile but we have a jandy cartridge system. Cartridges are new as of last year. The clear top on the pump doesn’t show air bubbles and water is flowing. The baskets are clean. As far I can tell there are no leaks.
The only other new thing is I recently replaced the salt cell. It doesn’t appear to be leaking and shows it has water but the controller says there’s low water flow. I thought it may be a bad flow switch but could it be related to my pressure issue?
Thank you in advance for any advice.