This is requested in the piping instructions.
I'm using 2" pipe so its asking for 10 up front on the suction side.
How important is this?
Quote from the manual
It is recommended that a valve, elbow or tee installed
in the suction line should be no closer to the front
of the pump than fve (5) times the suction line pipe
diameter
Thanks in advance
Ken
I'm using 2" pipe so its asking for 10 up front on the suction side.
How important is this?
Quote from the manual
It is recommended that a valve, elbow or tee installed
in the suction line should be no closer to the front
of the pump than fve (5) times the suction line pipe
diameter
Thanks in advance
Ken