- Jul 20, 2023
- 6
- Pool Size
- 8500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-3)
We have a Hayward SwimPure plus salt chlorinator( older) with a t3 turbo cell bought in may of 2022. Had water checked at pinch a penny told me salt was at 2900 but I had 0 chlorine in water. Checked salt chlorinator, the check salt, and inspect cell light is on. Tcell is clean, was cleaned the day before and salt water on salt chlorinator reads 300. I did the calibration with turning it off, to auto and press diagnostics 5 times. Nothing happens. Did it again goes to -0 and nothing happens. After 1 minutes goes back to check salt and inspect cell.
Diagnostic screen:
300
90
30.6
0.00
50P
-0
AL-1
R1.59
T3
Thank you if someone can help!
Diagnostic screen:
300
90
30.6
0.00
50P
-0
AL-1
R1.59
T3
Thank you if someone can help!
Last edited: