I have installed a suntouch panel with a 2 speed motor and 2 speed relay and cannot get the pump to switch between speeds properly. I have been In the industry for 8+ years and am very familiar with the latest and greatest pool equipment, however I have very little expertise with the suntouch system. I have verified multiple times that my wiring to both my pump and relays is correct, and am 100% certain I am missing or doing something wrong in the programming. My main pump relay is plugged into pump on the board and my 2 speed relay is plugged into aux 3 as I know this is the common mistake with this setup. Please advise with any info you have that may help.