Hello,
While I was on vacation I left my spa in the "Sleep" mode.
When I came back, the spa wasn't working and I saw that the GFCI trips immediately.
I opened the spa, disconnected power cables and the GFCI doesn't trip anymore. But when I connect the high voltage cable - it trips (doesn't trip with neutral & 12v connected).
I tried disconnecting all load (pumps, ozone generator, etc.) and it still trips. So I as understand the problem is in the electric board?
All fuses are fine.
Please advise.
Kind regards,
Pavel
While I was on vacation I left my spa in the "Sleep" mode.
When I came back, the spa wasn't working and I saw that the GFCI trips immediately.
I opened the spa, disconnected power cables and the GFCI doesn't trip anymore. But when I connect the high voltage cable - it trips (doesn't trip with neutral & 12v connected).
I tried disconnecting all load (pumps, ozone generator, etc.) and it still trips. So I as understand the problem is in the electric board?
All fuses are fine.
Please advise.
Kind regards,
Pavel
Attachments
-
1653950785196.JPEG108.5 KB · Views: 13
-
1653950774060.JPEG127 KB · Views: 8
-
1653950763350.JPEG109.7 KB · Views: 9
-
1653950771127.JPEG77 KB · Views: 9
-
1653950776326.JPEG126.5 KB · Views: 13
-
1653950772645.JPEG117.1 KB · Views: 15
-
1653950779555.JPEG88.7 KB · Views: 17
-
1653950783456.JPEG90 KB · Views: 15
-
1653950787901.JPEG92.6 KB · Views: 15
-
1653950792003.JPEG82 KB · Views: 18