SLAM Assistance Needed

[mknauss]

No need to run the booster pump then.
If you every want to just schedule the spillover and not run it all the time, there are ways to program it via your Aqualink.

You might consider changing your thread title, since you were not following the SLAM Process at the start, it is a bit harsh to say it was not working.

 

[dielseman]

Yes the spa is spillover. I fixed the signature. Thanks!

I fixed

No need to run the booster pump then.
If you every want to just schedule the spillover and not run it all the time, there are ways to program it via your Aqualink.

You might consider changing your thread title, since you were not following the SLAM Process at the start, it is a bit harsh to say it was not working.

I changed the title. How do I program the aqualink to change from spillover? I currently have it set to pool mode and the spa spills over into the pool. Is there any reason I should change this?

 

[mknauss]

Is there any reason I should change this?

The main reason is if you have an issue with rising pH. Do you? Aeration drives pH rise.
The following article describes setting up your automation for a Spillover function.

Jandy Aqualink RS - Further Reading

www.troublefreepool.com