I am finishing up installing our pool equipment and plan to put liner in this weekend. I’m needing assistance with the initial settings for the pool equipment. It’s a 20x40 with one return and two aquagenies. Pump is a Hayward 2.25 hp super pump xe and heat pump is a 8450ti-e-hc. All plumbing is 2” if that matters. No hot tub or anything of that sort.
First question is since this is a variable speed pump what are the most ideal settings for running the pump, as in what percent at what time of the day. Most of our swimming will be typical younger kids, early afternoon.
Second question is, what should I do for install settings on the heat pump. Pump control I believe I should select variable speed. 3 way valve I believe should be no bc I operate it manually with Jandy valve. And aux control is No bc I have none.
Third question, do I need to redirect any water from the heat pump with bypass valve? Manual shows I should have a flow of 80 gpm on pump but have not started yet to confirm.
Thanks everyone for your assistance
First question is since this is a variable speed pump what are the most ideal settings for running the pump, as in what percent at what time of the day. Most of our swimming will be typical younger kids, early afternoon.
Second question is, what should I do for install settings on the heat pump. Pump control I believe I should select variable speed. 3 way valve I believe should be no bc I operate it manually with Jandy valve. And aux control is No bc I have none.
Third question, do I need to redirect any water from the heat pump with bypass valve? Manual shows I should have a flow of 80 gpm on pump but have not started yet to confirm.
Thanks everyone for your assistance