I have a Jandy CS100. Tested my gauge (and bought a new one too... just because) -- and the gauge jumps to 10psi when I apply 10 PSI.
When mounted to the canister, I get "0". There is no air in the basket strainer (on the pump) and everything is flowing fine.
There are no valves in this system. Simple, input/outlet system. Yet... Zero. No matter what I do. It worked at one time. So... what gives?
When mounted to the canister, I get "0". There is no air in the basket strainer (on the pump) and everything is flowing fine.
There are no valves in this system. Simple, input/outlet system. Yet... Zero. No matter what I do. It worked at one time. So... what gives?
Last edited by a moderator: