I just read all I could on this site about the Intelliflo VSF losing its RS-485 connection to the ScreenLogic controller. I went ahead and contacted Pentair and they confirmed that the S/N 011028 does not have firmware issues, only the 011056 does apparently. They then told me they couldn't help me and to contact a pool tech. Has anyone come up with any solutions to this that didn't involve new firmware?
I get "Pump 1: Communication Lost" messages in my System Alerts as often as every 3 days and sometimes as long as 7 weeks. I then have to switch off the breaker and wait for the screen to shut off before turning on the breaker again. I've already tried swapping the cable, but that did not work. I also tried cleaning the contacts on the pump side. Any other thoughts or suggestions?
I get "Pump 1: Communication Lost" messages in my System Alerts as often as every 3 days and sometimes as long as 7 weeks. I then have to switch off the breaker and wait for the screen to shut off before turning on the breaker again. I've already tried swapping the cable, but that did not work. I also tried cleaning the contacts on the pump side. Any other thoughts or suggestions?