Overshot salt target.

[gnhand]

I accidentally got the salt level to 3500 - 3600. It is for a t-15 Hayward. Can I leave it there or must I lower the water level to get it below 3400?

And early today I added a 40 lb bag of salt. When adding small amounts like that it is recommended to turn off SWG for the next 24 hours? That 40 lbs is what put me over - I had read 3000 and 40 lb should have only raised the level to about 3300.

 

[ajw22]

It is not a major problem.

How are you measuring the salt level?

Where did the 3500-3600 come from?

 

[gnhand]

It is not a major problem.

How are you measuring the salt level?

Where did the 3500-3600 come from?

I used Taylor k-1766 . It started changing color at the 17th drop and completed at the 18th drop

 

[ajw22]

What does the Hayward system say the salinity is?

 

[gnhand]

What does the Hayward system say the salinity is?

2700 to 3400 with 3200 optimal

 

[ajw22]

2700 to 3400 with 3200 optimal

I am asking what is on the Hayward system display for salinity?

 

[ajw22]

What Hayward system do you have?

What are the diagnostics - volts, amps, salinity?

 

[gnhand]

I am asking what is on the Hayward system display for salinity?

I’ve had it off since i performed a SLAM. The fc is coming down. Currently around 17. But it has generally agreed with my test results prior to the SLAM.

 

[ajw22]

Report what the diagnostic readings are when you decide to turn your SWG on.

 

[gnhand]

Report what the diagnostic readings are when you decide to turn your SWG on.

I just turned my SWG back on - after my slam fc has dropped back to around 10 . I’ll let it get down to about 9ish

My diagnostics are in order:

3400


84
23..5
6.10
10P
-3700
AL - 2
r 1.59
T - 15


3400

 

[ajw22]

Your amps are in the 6s.

Your salt is fine. Let it drop naturally.