- Jan 8, 2016
- 86
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I recently installed an IC60 SWCG. I adjusted the chemistry as prescribed by TFP.
I increased the CYA to 80 ppm and I am surprised as to how little chlorine is evaporating.
Its kind of made it difficult to set up the cell.
I am in Texas (near Houston) with temperatures between mid 70s to mid 80s F and I am seeing .5 to 1 ppm of chlorine loss per day.
I am curious as to what others in a similar climate are experiencing.
I know that chlorine loss is affected by other factors but I am curious about what others are seeing just based on temps.
Thanks,
Puertex
I increased the CYA to 80 ppm and I am surprised as to how little chlorine is evaporating.
Its kind of made it difficult to set up the cell.
I am in Texas (near Houston) with temperatures between mid 70s to mid 80s F and I am seeing .5 to 1 ppm of chlorine loss per day.
I am curious as to what others in a similar climate are experiencing.
I know that chlorine loss is affected by other factors but I am curious about what others are seeing just based on temps.
Thanks,
Puertex