I got a pentair mastertemp propane heater installed last week. Its 400k btu model number 460737. Its seems to be working fine. Its connected to the main aquarite panel. When i keep it in pool mode on my aquarite control panel, turn on heater from the aquarite. The heater turns on , but the indicator on the display panel on heater shows 'spa'. Then when i switch to spa mode on aquarite panel, it does not switch on the heater panel. How should i fix this ? The pool professional was unable to fix it and he left saying its working fine so ignore what it shows on the heater panel. Which is BS!
I read the manual, there seems to be jumper that needs to be set to disable the buttons of the heater panel so its controlled remote only, i suspect that was not set properly by pool guy, i am unable to find that jumper when i opened the heater panel, anybody know where it is. I have attached pictures from my manual
I read the manual, there seems to be jumper that needs to be set to disable the buttons of the heater panel so its controlled remote only, i suspect that was not set properly by pool guy, i am unable to find that jumper when i opened the heater panel, anybody know where it is. I have attached pictures from my manual
![3a4f587366ed58f0cabb6b23eeb0c7e6.jpg](https://uploads.tapatalk-cdn.com/20170527/3a4f587366ed58f0cabb6b23eeb0c7e6.jpg)
![89b9c56445975afb0d69f53c224c74fa.jpg](https://uploads.tapatalk-cdn.com/20170527/89b9c56445975afb0d69f53c224c74fa.jpg)