Got it off! Did a few laps with the heat gun (enough to change the color of the MPV a little) and gave it a few good yanks with my breaker bar.Wasn't sure the heat would really affect 10+ year old silicone but I did. And it was definitely silicone in. I take it I should NOT use silicone when I reinstall?
Sand was pretty clumpy. Stuck to the sides enough that I had to break it loose. Not sure if that is normal.
3 of my laterals snapped off. Now I have to look into replacing. I might just replace that whole setup if anyone has any recommendations.
Thanks for all the help!
Sand was pretty clumpy. Stuck to the sides enough that I had to break it loose. Not sure if that is normal.
3 of my laterals snapped off. Now I have to look into replacing. I might just replace that whole setup if anyone has any recommendations.
Thanks for all the help!