I'm looking for a "stub" of PVC
Let me explain. I'll use an example. I need to cut out a 2-way valve in a manifold of other 2-ways, T's etc. But in reality, I've been thinking about the need for this for a long time.
So, normally you cut out the fixture on both sides enough to put in Female-Female couplers and build back with pipe to get to your fitting. Well, what if you don't have room to do this, and you may have to through out a bunch of valves and rebuild everything from scratch?
I've always thought there should be a PVC stub-out coupler. This is a slip fit Female-Male that is real short. You cut out your valve and it gives you back the pipe you lost in the valve slip joint. Only about 3" long or so and you don't loose a ton of pipe.
Anybody seen anything like this. I can't believe it doesn't exist!
Let me explain. I'll use an example. I need to cut out a 2-way valve in a manifold of other 2-ways, T's etc. But in reality, I've been thinking about the need for this for a long time.
So, normally you cut out the fixture on both sides enough to put in Female-Female couplers and build back with pipe to get to your fitting. Well, what if you don't have room to do this, and you may have to through out a bunch of valves and rebuild everything from scratch?
I've always thought there should be a PVC stub-out coupler. This is a slip fit Female-Male that is real short. You cut out your valve and it gives you back the pipe you lost in the valve slip joint. Only about 3" long or so and you don't loose a ton of pipe.
Anybody seen anything like this. I can't believe it doesn't exist!