Test results this morning FC=8.5 CC=0 PH=7.4 TA=80 what do yall think I should do? am I on the right track with this?
Just starting new pool with swg
- Thread starter joeam
- Start date
- May 22, 2013
- 2,796
- Pool Size
- 12000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
You need to check your stabilizer level to find out what your chlorine level should be. If you're still down around the 60 you need to raise it some
FC of 8.5 is high even with a CYA of 70. With an SWG, it's not as important to keep the FC sky high. I shoot for around 6 on mine, that way if the sun or bather load take it down, it is still above the minimum of 3.
I just added the stabilizer slowly over the last 24 hours with sock method how soon will that show up? im slowly allowing my fc to drift down to 6 is what im shooting for