Those (Jandy Nicheless LED's) are the same ones I have. Really nice to be able to control from iAqualink too.
Those lights look awesome! I like that look much better than the non-nicheless LEDs.
My builder advise they use the 9w Jandy Nicheless LEDs, not sure why not the 20w or 30w. Is that a big difference in cost? Right now he has me setup for four 9w LEDs in the pool and one 9w LED in the spa. Do you think that would be sufficient for a 35x12 rectangle pool, or should I insist we look and possibly order the 20w or 30w? Basically would have one every 9ft of the pool to provide even coverage. I just haven't really seen much on the 9w LEDs to confirm.
I have 3 of the 9w installed in my new build which I just finally got to see on the other day. The 9w on my tanning ledge is plenty of light but the two that are in the main body of the pool aren't enough especially considering my dark plaster. I have already spoken to my builder and he is going to swap the two in the main body out for the 30w versions.
Added a photo and some pool details in my post above for you.