I just set up a 12 by 24 swimming pool And filled with water. The Paver. underneath the u shaped leg is leaning putting pressure on the strap on the bottom of the pool that holds the leg. Is there any way I can remove that Paver.. with without draining the Swimming pool.
Intex swimming pool 12 by 24.
- Thread starter lalalinda
- Start date
- Jul 21, 2013
- 53,011
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Not safely. We have heard people take risks that we would not recommend.
You are dealing with thousands of pounds of water that can damage property and people.
Intex recommends using pressure treated boards instead of pavers to support the legs on their rectangular pools. The support for the legs needs to be large enough so the legs do not hang off the sides of the support, and so the legs have room to spread out as the pool is filled.
www.troublefreepool.com
www.troublefreepool.com
Not safely. We have heard people take risks that we would not recommend.
You are dealing with thousands of pounds of water that can damage property and people.
Intex recommends using pressure treated boards instead of pavers to support the legs on their rectangular pools. The support for the legs needs to be large enough so the legs do not hang off the sides of the support, and so the legs have room to spread out as the pool is filled.
How to level above ground pool - Further Reading
www.troublefreepool.com
Intex Pools - Further Reading
www.troublefreepool.com