I have the i10PS IntelliCenter system. This issue is relate to the intellivalves. On my system there are 2 ports for Intake and return valves and 2 Aux ports labeled A and B. I was renaming Aux A and I called it Intake. The system defaulted that valve to the Intake and it removed the ability to rename that valve or to assign it to any circuits. Any idea how to change this?
Intellicenter possible Glitch
- Thread starter poolmike2
- Start date
- Jul 21, 2013
- 52,852
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I am using version 2.006. I have had the system for about 2 years now so I started with 1.064 and updated.
- Jul 21, 2013
- 52,852
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
There are enough bugs in 2.006 that Pentair pulled the release and recommended people revert to 1.064.
Your problem is likely a 2.006 bug.
For how to revert to 1.064 read Pentair Automation Systems - Further Reading
Your problem is likely a 2.006 bug.
For how to revert to 1.064 read Pentair Automation Systems - Further Reading