- Apr 21, 2018
- 137
- Pool Size
- 30000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Universal40
So I recently filled my pool, then I noticed it was a not quite high enough after a couple weeks, I figured evaporation was causing it, so I filled it up a a couple of inches, sometime earlier this week, and it's been cloudy most of the week and raining for 2 days, and now it's back down to the original level at which I thought was too low,
So it seems I have a leak, now there are some cracks I can see in the skimmer assembly, I've attached a picture highlighting the cracked area, I also patched an area near one of the return jets,
Now the skimmer cracks could be fixed relatively easily I think, I'd just have to drain to just below the skimmer opening, dry it out, then seal with marine sealant, (that's my idea at least)
How can I check which area is leaking?
Who knows maybe it's somewhere else.
So it seems I have a leak, now there are some cracks I can see in the skimmer assembly, I've attached a picture highlighting the cracked area, I also patched an area near one of the return jets,
Now the skimmer cracks could be fixed relatively easily I think, I'd just have to drain to just below the skimmer opening, dry it out, then seal with marine sealant, (that's my idea at least)
How can I check which area is leaking?
Who knows maybe it's somewhere else.