I cannot get any pressure in my filter at all-it is full of water and the pump is moving water to the filter, but the filter registers zero and the jets wont operate>>>>Help
Is there water coming in from the pool? It sounds like either the inlets aren't open or you haven't allowed the pump to prime. With the pump off, fill the pump basket with as much water as you can get it to hold, install the lid and turn the pump on. It may take a minute or two to prime.
What kind of equipment are we talking about? Please add your pool details and location as described HERE as it will help us help you.
Is the pump full of water or air or both?
Does water come out the release valve on the top of the filter? (if you have one)
Is water returning to the pool?
Do you have a valve closed somewhere or a winterization plug still installed?
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!