- Jun 8, 2023
- 7
- Pool Size
- 25000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I'm hoping you guys can help me out here. After at least a year of generating fine, I'm getting the dreaded 'check salt' light and therefore no generation happening. I've cleaned the T15 cell, tested the salt with accu blue home kit and taken samples to leslies multiple times and they all read salinity around 3400. I took the salt cell itself to Leslies and they say it tests fine. The reading i get at the panel is 2.2, in fact here are all the readings:
2.2
29
32.5
0
44p
0
AL-2
r1.59
T-15
When i take the front panel off, i don't see any obvious burn outs. Is there a way to test the main board, or is there something else i'm missing.
Attached pics of the board.
2.2
29
32.5
0
44p
0
AL-2
r1.59
T-15
When i take the front panel off, i don't see any obvious burn outs. Is there a way to test the main board, or is there something else i'm missing.
Attached pics of the board.