- Sep 16, 2023
- 4
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Hello all -
I'm a new pool owner. Just noticed today taht my Hayward salt water generator's power LED is OFF; however, its display is working.
The diagnostic readings are - 2200, 71, 6.3, 0.0, 23P, 0, AL-0, r-1.58, t-15.
4-5 days ago, I noticed the pool turning green, and saw the reading 2200 (didn't pay attention to the power LED that time). So I dumped 1.5 bags of salt. The TF test salt reading today was 2800. I wanted to check how this test result compares with the SWG reading in the panel; and that's when I noticed the power LED not On.
I did some research in this forum and saw two possible reasons - fuse or thermistor. How do I narrow it down? or am I missing something? Please help.
Thanks
Jag
I'm a new pool owner. Just noticed today taht my Hayward salt water generator's power LED is OFF; however, its display is working.
The diagnostic readings are - 2200, 71, 6.3, 0.0, 23P, 0, AL-0, r-1.58, t-15.
4-5 days ago, I noticed the pool turning green, and saw the reading 2200 (didn't pay attention to the power LED that time). So I dumped 1.5 bags of salt. The TF test salt reading today was 2800. I wanted to check how this test result compares with the SWG reading in the panel; and that's when I noticed the power LED not On.
I did some research in this forum and saw two possible reasons - fuse or thermistor. How do I narrow it down? or am I missing something? Please help.
Thanks
Jag