De filter low pressure???

RESISTENCIA13

Well-known member
May 21, 2015
157
Scotch Plains, NJ
Pool Size
33000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Jandy Aquapure 700
Good morning!

I opened my pool last week and notice that the filter pressure is only 12 PSI. Normally the pressure is 20 PSI. Is this a problem? or does this indicate a possible problem or malfunction? If so how can I fix it?
 
A few things to consider
1) Does the gauge go to zero when the pump is off? Did the gauge stay outdoors all winter? If it froze, it's ruined.
2) Did you do a breakdown and cleaning either at the end of the season or before you fired things up this year? Could be last year it was clogged and this year it's not.
3) Did you pull all the rubber plugs? If the water flow is restricted on the suction side it will have lower pressure
4) Was the pool a mess and maybe you vacuumed up some pine needles or twigs that could slip through the baskets and clog the pump impeller?
5) Do you see any air in the pump basket?
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.