jsf0656
0
tmgoethe said:First, thanks for all of the truly usful information from everyone in these thread!
I do have a question about what you are using to seal the joint at the pump. The box adapters are a loose fit over the pump fittings (Intex 2,500 gph cartridge pump). It looks like I will have to cut a rubber gasket to get it to work. The connection at the SWG is fine as it has the fitting with the integrated O ring at the end of the union rather than around it.
Thanks again!
i used the rubber gaskets that came with the intex screw on nuts. along with the pipe glue and the gaskets together i had no leaks. worked great! :-D