Repair guy just left - changed o-rings in valves, cut out pvc joint leak (after the main pump) new check valve flapper that's the 4th one... and replaced the booster pump. The booster capacitor stopped working, and the B-pump had developed new leaks. The computer is set up for the main pump to come on at 7am till 4pm, and the cleaner/booster pump to come on at 9am to 10:30am.
FINALLY, no air bubbles at all!!! Cleaner works, no visible leaks.
2 bags of salt added just now..
PH - 7.5
FC - 6
CYA - 35
TA - 70
CH - 200
Salt - 1100
So right now - get the CYA & Salt up.
Add calcium chloride now, or wait?
Anything else at this point?
Thanks for all the help!!