hi there. Hoping for help finding an air leak. My inground pool has air bubbles shooting out of several of the Jets. I still seem to have full pressure though. I don’t see any dirt or sediment coming out. Is a significant amount of air. This started when I didn’t realize that the skimmer was blocked, and I believe that this created suction that resulted in the issue. I’ve already replaced the O-ring in the pump basket lid. Also had a tech troubleshoot, but could not find anything. The pump basket is full of water when the pool starts up, fully primed, and from there, the water goes to the filter, which is also at normal pressure. Somewhere around that point or after you can hear air gurgling before it goes underground. After it runs for a while, the air bleeds back into the pump basket and you can see it. I’m starting to wonder if the leak isn’t somewhere inside the pump, maybe around the impeller? I’m not technical enough, but if I can’t find a link externally, where should I look inside my Pentair pump? And is that even a possibility? i’m having trouble logically, figuring out how a pressurize system would suck in air, other than at the pump. Thanks so much.