In that case, you're doing well. Maybe overdoing the bleach a bit...Ok here are my numbers with K-2006
FC: 15.8
CC: 2
pH: 7.2
TA: 160
CH: 70
CYA: could see dot all the way
Haven't added bleach since yesterday around 4 pm.
Did the CYA sample at least get cloudy? You don't want to overload the water with CYA, but you should target about 30 until the SLAM is done and then raise it further.
Your pH is not accurate at those FC levels.
Speaking of levels... did you know you can test using 10 ml of water and have each drop count as .5? Speeds it up and saves reagents. Also, you don't need two full scoops of powder. As long as you add enough to se one or two undissolved crystals after mixing it, you have enough.
So at this point, add some CYA, allowing for what you guess might be in there based on cloudiness and continue to keep FC up at 12 or so and keep brushing, vacuuming, and filtering.