This past week I started testing my pool with a TF100 kit. I previously was making trips on the weekends to the pool store so it's fun doing this at home. I've read thru many posts and can't find a simple answer to my situation so here goes...
FC:4
CC:0
TC: 4
PH: 7.5
CYA:60
According to the chart my minimum FC is 5 at that cya level. So is it better to drain water or add chlorine? The pool math , if I'm doing it right shows I'll need to drain 1/3 of the pool or add the chlorine. I've been using the 3" tablets in my inline chlorinator and liquid chlorine for shocking the past two seasons, also relying on the pool store for directions. So, I guess I don't mind draining if that gets me back to a good starting point testing myself .
Any suggestions would be greatly appreciated.
FC:4
CC:0
TC: 4
PH: 7.5
CYA:60
According to the chart my minimum FC is 5 at that cya level. So is it better to drain water or add chlorine? The pool math , if I'm doing it right shows I'll need to drain 1/3 of the pool or add the chlorine. I've been using the 3" tablets in my inline chlorinator and liquid chlorine for shocking the past two seasons, also relying on the pool store for directions. So, I guess I don't mind draining if that gets me back to a good starting point testing myself .
Any suggestions would be greatly appreciated.