Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: New liner install issue

  1. Back To Top    #1

    New liner install issue

    I have a 24 foot round and am installing the beaded liner. As I finished the bead I have way too much liner left. i.e. overlaps 8 inches!

    I ordered 24 foot round liner...what am I missing here?
    24' X 52" Round AGP Hayward 1.5 HP


  2. Back To Top    #2

    Join Date
    Apr 2013
    Vincennes, Indiana

    Re: New liner install issue

    Do you mean you have too much bead left? If so we just had the same problem today installing ours.
    You need to hang it in 4 places north, south, east and west. Then do nw, sw, ne, se. Like you are tightening lugs on a wheel. Then just keep sliding the bead around until you use up all the slack.
    Hope that helps.

    Sent from my SCH-I545 using Tapatalk
    Matt Buckels new guy
    27x52 Vogue Discovery Resin above ground pool
    1 1/2 HP pump and sand filter

  3. Back To Top    #3

    Re: New liner install issue

    Yes, thanks. Reworked it and it was okay.
    24' X 52" Round AGP Hayward 1.5 HP


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts