G
Which one do you have? These test kits do.kittkatt808 said:In verte upset that The testing kit i have Does not test for cya
Your pH may have been much higher than 8.2. Anything above that reads the same. Give that bleach half an hour to mix, then repeat your acid addition. Recheck pH an hour after that (pump running the whole time) and see where pH is. I recall when I took over my pool, I used a 10 lb bucket of dry acid AND a gallon of Muriatic Acid to get the pH color to change!kittkatt808 said:Help!! After 2 hours of putting my nutation acid to lower my ph its still at 8.2
I put the reccommended 5.6oz as the calculator told me
I also tested my FC and it's .5 or 0
I just added 37oz of bleach as per the calculator should I add nore muratic acid right now
http://tftestkits.net/Single-Item-Tests-c6/ sells the FAS-DPD test and the CYA test individually.kittkatt808 said:I added 28 oz of cya to get my cya to 50...
Is that the# I'm reaching for?
I added more acid....
Also, that's it that's the kit I have ... DO I just add the additional