pool cleaner

I ran my smart clean multiple times but when I go to the “clean mode” on iAquaLink appt it says it’s still “calculating” just trying to figure out if anyone else has the same issues as I just want to know what’s the clean recommended for my pool now that it has ran multiple times. See screenshot...

My Maytronics S200 runs for a few seconds then stops (video). Yesterday I took everything apart, deep cleaned. Removed every last tiny leaf in the tracks. Ran for a full session and thought I had it fixed. Then stopped again today. During the out-of-water test today it again seems like the...

Hello friends, I was just curious if anyone has ever connected two suction side pool cleaners to one suction port or pump? I would ideally like to have a cleaner in the pool and another in the spa. Would a Y work?

I'm wondering if anyone else has experience issues with a Dolphin Active 30i or similar pool cleaner. Issue 1: Sometime, more often than not, the cleaner does not run the full cycle. Sometimes it will run 30 minutes, sometimes an hour and then it just stops. The controller is still on like...

Hello All! I need some help. I've never owned a robot cleaner and I'm looking to buy one for my 16x32 in-ground rectangular pool with a vinyl liner. I've done some searching and it looks like the reviews are all over the place on which models are recommended. I like the idea of being able...

TFP community. After years of manually cleaning my pool, I've decided to invest in a robot to save time. I have a 20k gallon salt water pool that is 36x20. I pulled the trigger on a dolphin CC plus for $810 (linked below); however, after I ordered it, I did some more research, and am now...

Dolphin S300i front wheel on bot

Dolphin S300i front wheel and bushing

Hi everyone! First time poster here.... Our pool is roughly 7 years old - our first cleaner was. Pentair Racer - lasted about 5 years then died. It was cheaper to replace it with a Polaris 280. The Polaris just randomly stops working, then if I untangle the cord, it goes back to normal -...

We just completed our in ground gunite pool with pebble interior. How long do I need to wait to attach/install pool cleaner. I have a “Poolvergnuegen Pool Cleaner” Some say one week some say 30 days.

Hello all! I just picked this up this weekend for $50, seller tells me it only ran for a minute or two and would need a reset, rinse and repeat. Figured I would give it ago since electronics are my thing and at the time it sounded like a fault in the PSU. Today I tried testing out in the...

I have been mostly lurking on this site and it has been an amazing boon to someone who knew nothing about pools/maintenance just a few years ago. Thank you to everyone for the great information and discussions. So I have been able to bumble along fairly effectively and maintain my pool for the...

I've been trying to diagnose a 9650iq Sport pool cleaner for one of our customers. They did not supply us with the cartridge that comes with the model. As I was diagnosing, I figured I'd try the original power supply first and submerged the cleaner into water. Ran for 10 second cycles in each...

Has anyone had an issue with one of the belts coming off the track on a newer CC Plus? Just bought this Summer found it very strange one of the belts seemed to have dislodged and popped off the bearing of the front wheel. Found it strange as the unit was just purchased this summer. Think maybe...

Hi All, i recently purchased a used Polaris P825robot off of Let-Go for a steal. After I got home, threw it in the pool and plugged it in and all was fine. Ran a cycle for about 1 1/2 hours. second time I went to use it, the SCS error indicator blinked once... and from Polaris that means...

Hello, I wonder if some has any ideas as to what can be wrong with my Polaris 380. The wheels are not turning at all. They only turn manually. Polaris just went thru a rebuilt, new belts, wheels, all new gears, all ball bearings are new as well as a new back up valve and tail. It was working...

I'm looking for a recommendation for a pool cleaner - adding a spillover hot tub and they said it was difficult to keep my pressure side pump in the plumbing so I'm going to dive into robotic (unless anyone thinks I should push back and get them to keep the pump/pressure side cleaner). The...

Just got a new gunite pool with pebble bottom. My builder said he doesn’t put the tail on the automatic cleaner. I don’t remember why.. I feel like at a minimum it wouldn’t hurt and best case, it works to design and helps clean the pool. Anyone else have any input on this topic?

Hello All, I have a used, less than 2 years, Nautilus CC Plus pool cleaner for sale. It includes the original packaging, user manual, cleaner, power supply/controller/timer, swivel cable and storage caddy. It is in perfect working order. Asking $600, located in Fort Worth Texas. Will ship...

https://www.amazon.com/gp/product/B00ESQMA8M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 So, right off I will say after 4 years (3 complete seasons and so far in 2019) I like this cleaner. A lot.... I never expected it to last into the 4th year for $90. It's still going strong. When I...