Search results

Which brand did you return?

If high amps is heat, what is the reasoning of shutting down with too low of salt? If anything the amps would be low, but the board still shuts down when the salt reading is below ~1700.

Welp, if you change your mind, I would be interested in buying that used T-15.

Where did you buy the Hayward?

Does that still hold? Because T-Cell 15 is $900 currently.

Wait, are you saying to remove the rock every time the pump turns on? That doesn't seem feasible.

Wait, if this second skimmer hole is plugged, are you saying that means the main drain isn't functional? Because mine is plugged, but I have 2 pipes running to my pump. So wouldn't that mean the main drain is running?

What if you have cloudy water BUT with high free chlorine AND with zero cya.

split from Question on air release valve on my filter My filters are below water level. When I open the valve after it has been running, air comes out. Is that normal?

Moved from HERE I have the same issue, but I solve it by plugging the return jets. Is that bad? This is when I work on NOT the suction side, the other side, not sure what it's called.

Let me try this over the weekend.

Can you recommend a good flow switch? A GLX-FLO-RP is $100. An aftermarket is $36. So I went with aftermarket last year. It just a spring-tensioned terminal that completes a circuit when water compresses the spring; nothing fancy.

Signature has been edited, thank you. The pump and SWG are all on the same switch (i.e. when the pump is off, so is the aquarite) Auto was always set to 100% during the issue. So even if SuperChlorinate reverted to Auto it should still be always generating. This whole no generating thing...

16x38' pool in Cranston, Rhode Island. Open from May - September. In 2015 we replaced our traditional chlorine/backwash system to an Aquarite SWG/cartridge filter system. I wasnt around much when the pool was traditional chlorine, so I can't compare the two systems much. BUT I do hate washing...

Also, not sure if relevant: last year the 'No Flow' light came on. So I replaced the flow switch. It helped, but a few weeks later the light came back on. So I ended up just jumping the flow switch, the jumper is currently plugged in.

Any help appreciated. We opened the pool on Saturday. Hayward T-Cell-15 with Aquarite control panel. When I came into the situation I noticed the Aquarite was set to 'Super Chlorinate' and the 'Generating' light was illuminated BUT the diagnostic menu showed: - 30volts - 0.00 amps - 0...