Search results

Sorry, got busy. Just wanted to thank you for the help. It was the pump, the pb replaced. I have a VSP for pool, that pump is only used for slide.

Thanks for all the help. No luck with capacitor. I called PB and they said submit warranty claim. We'll

Yes

No resistance reading

The cap was not charged so the windings are probably good. I can try and measure capacitance on starter cap now that I have it disconnected.

When you say cap and power wires you mean disconnect the wires going to cap?

I'm getting 243 VAC measuring L1 to L2 (I'm assuming that's line to line) We've had pump for 2 years so I'm assuming not. Can I test the thermal cutout switch?

When I opened lid there was some condensation on leads of capacitor and plastic housing around it.

Top and inside of pump. No noise, only relay click when I use iaqualink panel or app. Last week I noticed I had to click on Rockfall button in app multiple times before it actually came on but I didn't think anything of it until now

I measured directly at the pump between L1 and L2 and measured 243.3 VAC

Copy, I have a multimeter. I'll use that and let report back.

I was using AC voltage detector. No reading when Rockslide relay off in iAqualink. When I enabled Rockslide in iAqualink I could detect AC voltage. I could actually hear the relay click when enabled.

I have a Pentair Whisperflo (single speed) for my slide that suddenly stopped working. It is controlled via iAqualink. When I turn on via the app of control panel I can hear the relay but the pump remains off. I verified that I have power at the breaker. I reset breaker but no luck. Any...

Thanks! Pulled leaf out of the check valve and everything is good to go.

Happy New Year! It finally stopped raining in SoCal so I decided to do some pool cleaning to include cleaning the pump baskets. When I cleaned the filter pump basket I noticed a leaf stuck where it shouldn't be (red arrow pointing to it in picture)...not sure what this part of the pump...

If it comes back, I'll snap a picture of it on the steps... So far, everything looks good without SLAM being done

Not at all

It was on the steps and side wall near steps, when brushed it poofed up

Although, I maintain my FC #'s and do not have CC > 0.5 ppm, we didn't use the pool for 2 weeks and found mustard algae (I think) on the steps/wall by jacuzzi. I removed the bubble cover, brushed the entire pool...it hasn't come back. I was planning on doing a SLAM, but I pass the 3 criteria...

I will suggest that...we shall see if she is willing to go all in, unfortunately she's not in love with her pool it's just something she uses when she has people over

Will do, thanks!

I recently started taking care of my own pool because I noticed our pool service testing #'s didn't make sense after becoming a TFP member. I have now been doing the TFP method for 2 months and all is good -Thanks! I was talking to a friend and they indicated their pool service monthly costs...

Thanks. Sorry, saw some other posts related to this question after I posted. I will rely on pool math going forward and not worry about Watergram wheel. Before taking over and doing my own measurements the pH was always hovering around 8.0 and alkalinity was high...I started noticing a...

I'm 3 months into pool ownership. After researching and finding this site I gained confidence to take care of my own pool. I realized no one else is going to be more invested than me so why pay someone else... so thanks for all the great information! My #'s are as follows: FC - 7.8 CC - 0 pH...