Search results

  1. rose62

    Pump Motor Corrosion

    The pump motor for my Polaris is constantly corroding. I have the ground wire connected to the housing but it is literally crumbling. Not the first time. Should I run the wire to both of the aluminum ends of the housing. Only the pump end is dying. Though the other end is, but not nearly as...
  2. rose62

    Dead Cell. Options for Clear Water

    It's been a rough year here at RoseHaven!! Got the pumping problem repaired. Yesterday, as I was getting a lot of sand in the pool, I took apart the filter and the vertical pipe was broken. I repaired that with pvc and am pumping again now. But, my cell is dead. It lasted about five years...
  3. rose62

    Did I do a no-no? Plumbing

    This spring my skimmer clogged. In an effort to clear it I cut the plumbing before the basket, both from the drain and the skimmer. I bought one of those bladder attachments and cleared the clog and installed 1.5" unions on the two return lines. Now, the pump won't prime. Are the unions...
  4. rose62

    Liner chemical reaction and rust

    A couple of years ago we had our in-ground pool liner replaced. The east side of the pool deteriorated due to UV. Small holes developed into big ones then it finally tore open. When we had the new liner installed we chose the heavier material, at a slightly higher price. Last year I bought...
  5. rose62

    Cavitation source: Relief and concern

    First, let me state for the record that in operating my pool, I usually just do what's worked in the past and if I run into trouble I do a web search. The result being that I'll probably ask some stupid questions. Anyway, to the current issue: Since opening the pool, I've had a cavitation...
  6. rose62

    Pump motor failure

    Since I've owned my pool, motors have never lasted for very long. It seems that the seals are always letting water into the motor. I have a main motor and one that drives the Polaris. This year my main motor began to get loud. I removed it from the pump housing and unwired it so that I could...
  7. rose62

    SWG not chlorinating-no codes.

    We had a new liner installed this February. After refilling, I guesstimated how much salt to add and I'm showing 3900. I have noticed inconsistent chlorine readings; Some days fine, others no chlorine at all. So I let the pump and SWG run constantly for two days. I tested the water this...