Search results

wow. I am shocked that volute isn't more expensive.

I'm thinking about taking a tiny drill bit and putting a hole at the end of that crack to alleviate the stress.

Here is a pic

Honestly I'm not sure how long this has been this way, and it's not leaking air or water, but I want to keep it from getting worse obviously. Any thoughts?

Yea, no softened water, but I do have a sand filter to backwash regularly.

Tucson AZ. The home of high calcium tap water and rapid evaporation... I am trying to decide if I need to do a partial drain and refill. Salt pool, 21000gal, pebble finish, built 7 years ago. FC 3 TC 4 Temp 85 PH 7.4 TA 40ppm CH 675ppm CYA 30ppm I've never had a problem keeping the LSI -.3 to...

I ended up trashing the screenlogic completely and built nodejsPoolController on a raspberry pi. Connected the pi to the EasyTouch panel and never looked back. Glad this is helping people though!

the screws are about 125mm apart and the diameter is about 165mm. Depth of the light is somewhere around 45mm, but I have not measured the actual mounting in the pool to determine its depth.

Hey all, I need some thoughts on replacing some failed LED lights. My pool was built by one of the big AZ pool builders about 7 years ago. They used BlueSquare Spectrum 360 color LED's for the pool and spa. I have 3 of these altogether. I'm pretty disappointed as I don't run these lights super...

hey guys, I have this running with my pentair easytouch. One thing I can't seem to find though is how to set the time of the easytouch via this njsPC + dash interface. Am I missing it, or is it not implemented?

Well there is a typo that makes no sense. Mine has been stuck since April 15.

Mine is stuck on April 25. Tucson Airport.

NewDude has been around the block. Stuck Weir door. Thanks Man!

You know, I didn't actually check the weir door as when I looked at the skimmer this afternoon it appeared to be floating freely. But I just pushed on it and sure enough it was stuck closed. I freed it up and am going to check out the pump. It's dark, but I have a flashlight... and I'll sleep...

Yep, definitely checked the skimmer to make sure nothing was in there. the weir is free and the skimmer is full of water. It is a really deep skimmer, about 2ft deep, but I can see to the bottom of it and the 2" pipe at the bottom is clear from what I can see.

I've been noticing that I have air in the pump basket over the past few weeks. I didn't think too much of it as I haven't replaced the lid o-rings for 3 years now. Being the off season and the pool always covered with the blanket, my suction valve is set to full main-drain. I don't run the...

Some wifi routers don't allow wireless to wireless communication. Might be a setting on your wifi router or ap to allow it.

I used playOn MAC successfully. However I recently switched to using the unofficial Wineskin Winery instead.

This is super cool. You basically have the capacity of a T15 cell with replacement electrodes in the $60 range. I like it.

it might be worth a "prove it" to the pool builder. The Autopilot does have RS485, so it may be a compatable protocol.

I don't think those are toggle switches, those are breakers also. I think they are a switch on only type of breaker so you can't cycle them. You can try though. I know that my panel is configured so that the panel power is turned on by a breaker in my main house fuse panel, not the breakers in...

did you ever get this sorted? When you bring up screenlogic connect on your computer click the "options" button to expand the local discoveries. Does it list anything under "local systems"?

I was able to install the Windows version with PlayOnMac. Install the windows setup.exe using a 32bit wine from the play-on installer. Haven't been able to get the direct link to work yet, so I have to launch from within PlayOnMac, but the app does work well.

I was forced yesterday to upgrade to the latest Catalina, which broke Screenlogic of course. Won't even launch.

yep

The whole system is just shy of 4 years old. Pump has been running great all day. Yes, the GFCI's are one on top of the other in the easytouch panel. Ive double checked connections at the breakers and cycled the ones in the house main panel as well. Fingers crossed.