Search results

I'm having the same issue as sbcpool, the original bypass cell doesn't fit threads. I purchased RJ60 June 8 2020. They have sent me a additional bypass, however it doesn't fit. I clean cell once a year so I called them and they said they would send another but I'm pretty sure it would be the...

I checked my CYA, it is 55. I will dissolve some more stabilizer in a sock. get it up to 75-80.

Ive seen a couple of these threads, but I'm running my unit at 100% six hours a day, and it should, by my calculations, give me 1ppm per hour ran. 3.1lbs of chlorine produces per 24hrs , is this maybe in super chlorinate mode? I'm am going to do and OCLT tonight to rule that out.

No, I didn't see any tag, but this pool is 30 years old, and i've only bought the place 5 years.

Thanks for everyone's replys, I'm trying not to replumb the pump....basically if I cut anything I have to replace all valves, pump everything because there is no room to glue on anything... Probably 1500$ or more undertaking with pump, valves, etc

Just spent a wad of cash for circupool rj-60, and being my first SWG, do I need to protect the control box and cell with a shade cloth from the harsh phoenix az sun.

I cant find any markings on the pump at all, only on the motor, which has obviously been replaced. The 3 valves are on return side. Why should they get replaced? they go to scuppers.

I looking to maybe upgrade motor to variable speed, I was hoping to swap the motor and leave the pump. Does anyone know what pump this is?

Ok, I think I may go with the RJ-60, I try to run my pump the least amount possible. By my calculations I can put 3-4pm in a couple hours.

I think I'm going to go with the RJ-45. Curious if what increments you can adjust the production. Also, the flow sensor, if you removed it from the T, is in the same size as my stenner injection point?

Heres a couple photos.

I'm thinking of getting a circupool, and I'm trying to figure out the SJ, RJ, or core. The problem is I dont have alot of room for install. The only way I see it working install directly out of the filter. I prefer the RJ with with flow sensor I dont think it would work. Can I still and tap the...

Hmmmm. My signature is gone Phoenix, az 15k in ground plaster pool

Hey guys, I've done TFP method for the the past 4 years when we bought our house with the pool. It has been good, but I have never used tablets. I'm just tired of hauling 16 gallons a month of liquid, plus acid which is about 85$ a month. Initially the stenner pump was buying time until I...

I know that I OD muriatic acid, which is possibly due to a bit cooler weather, which in turn need less top off water, which in turn lessened my need for ma as TA didn't climb as usual. I'm assuming the black spots are copper ? I have no copper pipe except a small stub up for top off valve. I do...

Hey guys my pool has been good, but due to living in phoenix I have high chlorine use, high evaporation, and high ph, TA, and ch in fill water. I know its getting time to drain and refill as the CH is really high. It has been 2 years since last drain and refill. My ph and TA always drifts up...

I get it from abes pool supply, around the corner from my house. (cave creek and greenway rd.) They carry a lot of used stuff, as well, its really nice place the have. It is 12$ for a 4 gallon crate, plus the bottle fee the first time. They get shipments weekly so it's always fresh, and hasa has...

Be careful, i was in ace the other day and saw it was on sale as well. I was going to grab some, I checked the date per the julian dating thread, and it was bottled in 2013. Naturally, I didn't get it. I still get the best deal at the pool supply that has 4 gallon returnable crate w/jugs 12.5%...

Hey guys, my pool is a 15k gallon kidney bean kind of shape with largest measurements of 20' x 30'. I have a non variable speed pump, that has a skimmer and main drain, so no dedicated suction inlet for a suction side cleaner. The returns are by way of jets on side of pool, and 19 in-floor...

1. Which liquid chlorine dosing system do you use? Stenner 40GPD 2. Does your system respond to a sensor, or do you dial it in based on your drop-based testing? drop-based and dial it in. 3. What is your current pump run time? 4 hours per day 4. What is the run time of your liquid...

I have 3 nichless 1.5" fiber optic lights in place, but they just barely give enough light to tell that they are on if you look directly in to them, they give no light into the pool what-so-ever. Replacing the fiber strands would be expensive and still not give great light i hear. Im building a...

I choose the stenner because thats all anyone talks about on here, and say its the cheapest way etc. I had no idea I would be dumping so much in. Perhaps i should bring CYA up to 60, and try that. My chlorine barrel is opaque white, and is pretty well shaded by trees most of the day, and as of...