Are there any guides on how to treat a newly refilled pool? I have no idea what I am in for so looking for some advice on what to expect. Will the levels be completely out of whack? Thanks
Just installed a new liner and filling up the pool...
- Thread starter pisstol27
- Start date
- Jul 21, 2013
- 53,561
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Thank you for the above link. My levels after filling the pool and getting the equipment running for a day are:
FC: 2 (the pool company added some liquid shock when finishing the installation)
CC: 0
pH: 7.2
TA: 30
CH: 0
CYA: 0
The guide days after bringing up the CYA I can then add chlorine to normal levels, and with PH in an acceptable range I can worry about the TA levels later. I was expecting much more work than this but it's not any different than normal maintenance unless I am missing something.
FC: 2 (the pool company added some liquid shock when finishing the installation)
CC: 0
pH: 7.2
TA: 30
CH: 0
CYA: 0
The guide days after bringing up the CYA I can then add chlorine to normal levels, and with PH in an acceptable range I can worry about the TA levels later. I was expecting much more work than this but it's not any different than normal maintenance unless I am missing something.
- Jul 21, 2013
- 53,561
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Similar threads
