Betta SE Plus

Check out my thread on the Aiper Scuba S1. Really starting to enjoy it.
Oh - I have been reading it a lot. I think I give another couple of months but keep updating the thread with any data.
Thanks for your contributions!!
 
Got the SE Plus and it was hung up in skimmer current within 5 minutes. Not enough power to pull away from it and I’m only running the pump on a medium speed. Don’t want to turn down the pump or put barriers around the skimmers because they do a fantastic job. Was hoping to just help them out with the Betta. Bye bye Betta.
IMG_7562.jpeg
 
Got the SE Plus and it was hung up in skimmer current within 5 minutes. Not enough power to pull away from it and I’m only running the pump on a medium speed. Don’t want to turn down the pump or put barriers around the skimmers because they do a fantastic job. Was hoping to just help them out with the Betta. Bye bye Betta.
View attachment 567262
I just took a piece of 1" foam I had laying around, cut it to make a divider that sticks out a little. It seems to steer away from it. Or you can turn skimmer flow down a little if your skimmers have a separate valve. You barely need them if you run Betta 24/7.
 
I just took a piece of 1" foam I had laying around, cut it to make a divider that sticks out a little. It seems to steer away from it. Or you can turn skimmer flow down a little if your skimmers have a separate valve. You barely need them if you run Betta 24/7.

Tcat, I did redirect almost all of my pool suction to the floor drains rather than the skimmer since the skimmer is basically not needed anymore. A couple of advantages to having the Betta SE is that:
  1. I barely ever have to clean out the skimmer any more
  2. I do not have to worry about over taxing the pump anymore trying to suck debris through the skimmer during leaf, flower, pine needle, or any other debris season
  3. When I go on vacation, I can turn the skimmer completely off and not have to worry about the pool getting too low on water for the skimmer or something clogging up the skimmer causing the pump to overheat.
My Betta SE has found a permanent home in my pool.

On a side note: I just realized that before I bought the Betta SE, my pool suction was set-up entirely opposite. I barely had any suction on the floor drains and all directed to the skimmer, and I always worried on a couple week vacations that the skimmer would get clogged and the pump would overheat. Betta SE is worth every penny of non-stress.
 

Enjoying this content?

Support TFP with a donation.

Give Support
DB how shallow is your splash pad? Mine is around 8" deep and I'd hate for it not to be able to get that area (8' x 20').
It depends on my water level. Mine is definitely not 8" deep unless maybe my pool is totally full. You'll be fine!
 
I just emailed with Betta. It was $30 cheaper on Amazon. They said I could still buy the Betta warranty even though my purchase was on Amazon. I’ll give it a go!
Just ordered the Betta SE- Plus from Amazon on Tues night and am sitting on my front porch annxiously awaiting the delivery truck. Betta said I could buy the warranty from them regardless of where I bought it so I went with Amazon since the return policy is sooo much easier. And it was the same price from both.
Can’t wait to use it in conjunction with my Aiper Scuba S-1 which I’ve used every other day since I got it and am pleased with its performance in the floor only mode. Only did the walls once and it got about 70% coverage so it’s time to try it again to see how it does. Pereonslly, since it’s getting 98% or more of the floor, I’m happy since that’s where all the dirt is anyway, so I won’t be sending it back. I’m expecting to be even happier with the Betta since my dogwood is dropping all the flowers in my pool today. Fingers crossed.
 
  • Like
Reactions: HermanTX
Just ordered the Betta SE- Plus from Amazon on Tues night and am sitting on my front porch annxiously awaiting the delivery truck. Betta said I could buy the warranty from them regardless of where I bought it so I went with Amazon since the return policy is sooo much easier. And it was the same price from both.
Can’t wait to use it in conjunction with my Aiper Scuba S-1 which I’ve used every other day since I got it and am pleased with its performance in the floor only mode. Only did the walls once and it got about 70% coverage so it’s time to try it again to see how it does. Pereonslly, since it’s getting 98% or more of the floor, I’m happy since that’s where all the dirt is anyway, so I won’t be sending it back. I’m expecting to be even happier with the Betta since my dogwood is dropping all the flowers in my pool today. Fingers crossed.
Great.
I just ordered the Aiper Scuba 1 (standard) so will have the same set up as you. I also ordered the Betta SE Plus on Amazon and purchased the warranty directly from betta.
The Aiper has a 2 yr warranty with it so see if it makes it.